Buy Brake flexi hose and repair your car affordably

Brake hoses - function and task. A short description

Using the brake fluid, the braking force is transmitted from the master cylinder to the wheel brake cylinders or calipers. Usually brake lines are used for this, which actually make up the largest part of the route. Brake hoses must be used for the last centimetre however because flexible and mobile transmission is required because of the suspension. For this reason the brake hoses must be made of materials that can stand up to these extremely difficult conditions. Extremely high pressure in the cables and hoses results from the transmission of the braking force. Exactly this kind of high hydraulic pressure is needed to operate the brake. However, external factors such as moisture, cold or dirt can interact with the hose materials. The brake hose is a component that must meet very high quality standards. The well-known manufacturers of brake hoses are TRW, FEBI BILSTEIN, MAPCO, BREMBO, NK, BOSCH and ATE.

Assembling a brake hose and the effects of defects

The brake hose is only made of high quality rubber on the outside and inside of the hose. The necessary connection pieces are made of metal and are screwed together with the corresponding components of the braking system (brake line, brake master cylinder and caliper). If a defect occurs to the brake hose (e.g.: If the brake hose is porous), the brake pressure required for braking is lost. The braking effect then decreases significantly because the affected brake circuit can no longer work because of the pressure loss.

Replacing the brake hoses. Where can I buy them?

Even though brake hoses usually last very long, it may be necessary to replace them under certain conditions, for example if it is mechanically over-utilized. Material fatigue can also require replacement. In general replacements are not difficult. Problems can only arise if the connections are heavily rusted and cannot be removed without difficulties. It is also important to note that brake fluid will leak and should be caught in a pan. When attaching the hose, one should pay attention that the hose is not pinched or twisted, otherwise it can become damaged. After replacement, the entire braking system needs to be vented. You will find cheap brake hoses and other parts for the brake system in our online shop. You can easily order stainless steel braided brake hoses and rubber brake hoses from well-known manufacturers.